Calibrating The Computer Display - RADVision SCOPIA XT1000 Series User Manual

c.
Step 2
Connect the computer audio to the Codec Unit.
•
•

Calibrating the Computer Display

Configure the computer display to one of the supported picture resolutions and refresh
frequencies.
Procedure
Step 1
Right-click on your computer desktop. The Display Properties page appears.
Step 2
Select Settings.
Step 3
Select one of the relevant resolution and refresh frequencies.
Table 5-1
DVI-I
VGA
SVGA
XGA
WXGA
SXGA
WSGA
UXGA
WUXGA
Note:
If you connect a camera to the DVI-I input, the system will manage it as PC content.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
Connect the VGA cable to the PC/Laptop VGA out socket.
Since audio input is not included in the DVI-I port to Codec Unit connection, establish a
separate audio connection from the computer's audio output port into the S/PDIF audio
input port of the Codec Unit.
If the computer does not support digital audio, use an external analog-to-digital converter.
See the SCOPIA XT1000 Installation Guide for information on this setup.
Resolution and Refresh Frequencies
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1280 x 1024
1440 x 900
1600 x 1200
1920 x 1200
Refresh Frequency (Hz)
60, 72, 75, 85
56, 60, 72, 75, 85
60, 70, 72, 75, 85
60, 75
60, 67, 70, 72, 75, 76, 85
60
60
60
Preparing for a Video Call or Videoconference | 28