RADVision SCOPIA XT1000 Series User Manual page 23

accept incoming calls automatically. When an incoming call is received, the local presentation
mode is suspended. The original video source and graphics are restored, and system displays the
prompt allowing you to choose how to handle the call (accept/reject/do not disturb).
You can configure your XT1000 so that it enters the local presentation mode automatically. When
configured so, the system starts presenting the moment you connect a PC to the DVI connector
on the Codec Unit if there is no active call.
If the PC resolution is not supported, the system suggests the maximum supported resolution for
the PC/laptop:1440x900 (analog) or 1920x1200 (digital).
When accessing the local presentation mode, the current selection of the live camera is saved;
the video input switches to DVI and the audio settings associated to DVI are automatically used.
You can also enter the local presentation mode manually by pressing the Presentation button on
the XT1000 Remote Control Unit.
If you manage your SCOPIA XT1000 remotely using web interface, you can configure it to enter
the local presentation mode automatically by accessing the web interface and navigating to
Settings > User settings > User preferences.
Procedure
Step 1
Navigate to Settings.
Step 2
Press
Step 3
Select User preferences.
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.5
User settings.
Figure 4-1 Configuring the local presentation mode
Tailoring Your User Experience | 22