Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
REAR BAR OF FRAME
OR WING ASSEMBLY
3/4-10 HEX LOCK
NUT
3/4-10 X 10-1/2 HEX
HEAD CAP SCREW
LIGHT BRACKET
ASSEMBLY
U-BOLT
3/4-10 X 2-1/4
HEX HEAD CAP
SCREW
3/4-10 HEX
LOCK NUT
SUPPORT PLATE
CHOPPER REEL
ARM ASSEMBLY
2211-11 choppers op
Chopper Reel Installation
(Option)
1. Slide chopper reel arm assemblies over rear frame
bar using chopper reel placement drawings (See
Figures 2-5, 2-6, and 3-27).
2. Bolt in place using top and bottom support plates,
3/4-10 x 10-1/2 hex head cap screws, and hex lock
nuts.
3. Attach reel/gang bar assemblies to chopper reel arm
assemblies using placement drawings (See
Figures 2-5, 2-6, and 3-27).
4. Bolt in place using gang bar mount plate, 3/4-10 x 5
hex head cap screws, and hex lock nuts.
3-30
Figure 3-27: Chopper Reel Installation (Option)
REEL/GANG BAR
ASSEMBLY
GANG BAR
MOUNT PLATE
3/4-10 X 5 HEX
HEAD CAP SCREW
F-571-0511 Edition
Advertisement
Table of Contents
