Raven SmarTrax Installation Manual page 52

For agco rt-a series, massey ferguson 64xx/74xx/76xx series and challenger mt5x5b series

Hide thumbs Also See for SmarTrax:

Table of Contents

Chapter 6

Access the System Diagnostic screen by selecting the MACHINE TEST option on the Machine Type screen

and turn the wheels using the Raven console.

Note:

If there are issues with the SmarTrax system, turn off the machine and correct them immediately.

For additional assistance, refer to the SmarTrax and SmartSteer Calibration & Operation Manual

(P/N 016-0171-277) or contact your local Raven dealer.

Calibrate the SmarTrax System

Refer to the SmarTrax & SmartSteer Calibration & Operation Manual (P/N 016-0171-277) for instructions on

calibrating the SmarTrax system, adjusting system settings, and system operation.

Important:

Verify the center WAS position during WAS calibration. The ideal center WAS value is around 500.

AGCO RT-A Series, Massey Ferguson 64XX/74XX/76XX Series, Challenger MT5X5B Series SmarTrax™ Installation Manual

Table of Contents