Viewing The Cassette Quick Test Results; Printing The Cassette Quick Test Results - Siemens CLINITEK Status+ Operator's Manual

Note If you set up the analyzer to print the test results
automatically, the Printing screen displays until the printout
finishes. If you set up the analyzer with a connection to a PC, the
analyzer sends the test results to the PC.
The Clinitest hCG test results are either negative, positive, or
borderline. The analyzer takes approximately 5 minutes to confirm
a negative result. If the result is a clear positive, the analyzer
reports it sooner. If the result is borderline, then you should retest
with a new sample in 48 to 72 hours. For complete instructions on
test results, see the Clinitest hCG cassette test instructions for use
insert.
For instructions on how to set up the analyzer so that you can print
the results automatically or send the results to a computer, see
Section 7, System Configuration, Changing the Connectivity
Settings‚ page 110.

Viewing the Cassette Quick Test Results

The test results display on the Results screen. Select Done to return to
the main Results screen.

Printing the Cassette Quick Test Results

Print the cassette Quick Test results manually or automatically, or send
the results to a computer.
To print the cassette Quick Test results manually, select Print.
The test results printout includes the following information:
• Cassette type
• Lot number, if configured
• Lot expiration date, if configured
• Test date
• Test time
• Test number
• Results
For instructions on how to set up the analyzer so you can print the
results automatically or send the results to a computer, see Section
7, System Configuration.
CLINITEK Status+ Analyzer Operator's Guide 37