System Configuration; Default Settings - Siemens CLINITEK Status+ Operator's Manual

7

System Configuration

You can configure your CLINITEK Status+ analyzer to suit your
workplace requirements. If you do not customize any configuration
settings, the system uses the default configuration settings.
• For instructions on how to unpack and install your
CLINITEK Status+ analyzer, see Section 1, Introduction.
• If you have a CLINITEK Status connector, and need instructions on
how to configure the connector, see the CLINITEK Status Connect
System Operator's Guide, Section 6, System Configuration.

Default Settings

You can view and print the system configuration settings, as explained
in Viewing and Printing the System Configuration Settings‚ page 127.
The following table contains the system configuration options with
their default settings for English (US).
Note For CLINITEK Status connector system configuration settings,
see the CLINITEK Status Connect System Operator's Guide, Section 6,
System Configuration.
Configuration Option
Allow Results to be Sent to
PC
Authorized Operator
Bar-code Reader
Chemistries Reported
Custom Field
Date Format
Display Contrast
Include Patient Name or
Patient ID in Results
Input Settings
CLINITEK Status+ Analyzer Operator's Guide
Default Setting
Enabled
Disabled
Disabled
• Strip: ALB, BIL, BLO, CRE, GLU, KET,
LEU, NIT, pH, PRO, SG, URO
• Cassette: hCG
Disabled
MM-DD-YY
0 (zero)
Patient Name
Quick Test
85