Siemens CLINITEK Status+ Operator's Manual page 164

Term
ready
recall
restore
required entry
sample interference
notes
screen
screen title
Select Ready screen
settings
Settings screen
SI units
software
164
Definition
The state when the analyzer is available to
perform tests.
To access data such as test results stored on
the analyzer.
To restore the analyzer setup to the default
settings.
A data entry box that must have data
entered into it.
Informs the user when appropriate about
test results that can be affected by
components detected in the same urine
sample.
The display area that contains the controls
the operator selects when operating the
analyzer. The analyzer software UI contains
screens, prompts, messages, and other
operating information.
A text label that typically displays in the
upper left corner of a screen which serves as
a label for that screen.
The software UI screen that displays when
the system completes the startup process.
All software UI navigation begins from the
Select Ready screen.
The areas of the software user interface
where you can configure the analyzer.
A software UI screen which enables the
operator to adjust or configure some aspect
of the analyzer.
An abbreviation for Systéme International, a
unit of measure.
Computer instructions that generate and
carry out commands to control the system
operation.
CLINITEK Status+ Analyzer Operator's Guide