Siemens CLINITEK Status+ Operator's Manual page 163

Term
keyboard
laboratory
information system
Menu screen
Normal System
notifications message A message that conveys information about
navigation
navigation button
parity
Plus System
power supply
prompt
quality control
Quick Test
CLINITEK Status+ Analyzer Operator's Guide
Definition
A software UI display (alphabetic or numeric)
that the operator uses to type information.
Laboratory computer system that you can
connect to the analyzer. Abbreviation: LIS.
A software UI screen that displays a list of
commands and one or more command
buttons for the operator to select.
Provides a negative result or a value for a
positive result.
the analyzer to the operator.
The act of moving between the screens that
comprise the analyzer software UI.
A software UI button control that when
selected, brings the operator to a different
software UI screen.
A serial communication setting that verifies
whether the data has been transmitted
accurately.
Provides plus symbols (+) for a result. The
more plus symbols, the higher the result. For
example, 2 + represents two plus symbols
(++) and 3+ represents three plus symbols
(+++).
Electronic component of the analyzer that
converts the AC voltages in the power line to
the DC voltages inside the analyzer.
Questions, instructions, or commands that
help the operator complete the current task.
A process that ensures the operator is
following the procedure to obtain accurate
test results. Abbreviation: QC.
A strip or cassette test where the analyzer
does not prompt you to enter patient or
operator information.
163