Siemens CLINITEK Status+ Operator's Manual page 15

6. Feed the edge of the paper through the printer cover.
7. Push the paper holding arm down in the closed position (see
Figure 1-4).
8. Close the paper roll and printer covers by clicking them into
position.
Note By default, the analyzer automatically prints the test results.
To disable the automatic print function, see Section 7, System
Configuration, Changing the System Settings‚ page 107.
Figure 1-4: Printer Paper Compartment
1 Paper holding arm
2 Printer paper
CLINITEK Status+ Analyzer Operator's Guide 15