Recalling The Patient Test Results - Siemens CLINITEK Status+ Operator's Manual

Recalling the Patient Test Results

You can search for the patient test results by patient name or patient
ID, or by date. You also can view all the results, and print the patient
test results you want.
To search for and recall the patient test results, perform the following
steps:
1. At the Select Ready screen, select Recall Results.
The Recall Options screen displays.
2. Select Recall Patient Tests or QC Tests.
Note The QC feature is available only with a CLINITEK Status
connector. For details, see the CLINITEK Status Connect System
Operator's Guide.
The Recall Options screen displays.
3. Select Patient Tests (default), if necessary, and select Next.
4. Search for the results in either of the following ways, or view all
the results by skipping to step 5.
To search by patient name or patient ID, perform the following
steps:
a. Select Search for name or ID.
b. Enter the patient name or patient ID and select Enter.
To search by date, perform the following steps:
a. Select Search by date.
b. Enter the earliest date by using the scroll arrows.
c. Enter the latest date by using the scroll arrows.
d. Select Select.
80 CLINITEK Status+ Analyzer Operator's Guide