Printer; Connections And Power; Memory Card Slot - Siemens CLINITEK Status+ Operator's Manual

4. You can transfer the test results to a computer by using the RS-232
serial port on the back of the analyzer.
If you run a CLINITEK Status+ analyzer with a CLINITEK Status
connector, you can transfer the test results through a wireless or
wired Ethernet connection.

Printer

An internal thermal printer prints the test results.

Connections and Power

Connect the analyzer into an electrical outlet to use on a benchtop, or
use batteries so you can freely move the analyzer from one testing site
to another.

Memory Card Slot

The memory stores the analyzer software, operating parameters,
settings you select, up to 950 patient test results, and 200 authorized
operators. The information is stored in the memory, whether the
analyzer is powered on or off.
You can update the software by inserting a memory card into the slot
under the printer cover (see Figure 1-6).
Figure 1-6: Memory Card Slot
1 Memory Card Slot
20 CLINITEK Status+ Analyzer Operator's Guide