Powering On/Off - Siemens CLINITEK Status+ Operator's Manual

Table of Contents

Advertisement

Powering On/Off

If you power on the analyzer for the first time, the Start Up Wizard
prompts you through a set-up procedure. Also, you must enter a
startup code when you use the analyzer for the first time.
To power on the analyzer, perform the following steps:
1. Press the on/off button on the front of the analyzer.
The analyzer runs a diagnostic test each time you power on the
analyzer.
If this is the first time you powered on the analyzer, the Start Up
Wizard displays and prompts you to select a region.
2. Select a region.
Note If your region does not display in the list, select Other.
The Authorization Code screen displays.
3. For the start up code, enter 2664.
Note If you enter an incorrect start-up code, the Incorrect
Authorization Code error message displays. Select No to
return to the Authorization Code screen and enter 2664.
To power off the analyzer, perform the following steps:
1. Before you power off the analyzer, always ensure that no strip or
cassette is on the test table and that the table and insert are clean.
16
CLINITEK Status+ Analyzer Operator's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents