Process Image; Indicators; Isolation; Table 20: Technical Data − Process Image - WAGO SPEEDWAY 767 Series Manual

28 Device Description
3.7.13

Process Image

Table 20: Technical data − Process image
Process data width (interfaces)
Process data width (DIO)
3.7.14

Indicators

Table 21: Technical data − Indicators
SB: S-BUS status
F: Error status
Ch1.1/Ch2.1: Transmission status
Ch1.2/Ch2.2: Reception status
0 ... 3: Input and output signal
status
0 ... 3: Output diagnostics
U + U
LS
LED indicators:
3.7.15

Isolation

Table 22: Technical data − Isolation
Channel - Channel
U , U , S-BUS
LS A
Pos : 19.32 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
: Supply status
A
767-5203 Serial Interface (RS-232, RS-422/-485)
10 byte (data In/Out + status)
1 byte data In/Out + 1 byte status
LED (green/red/orange)
LED (red)
LED (yellow)
LED (yellow/red)
LED (yellow)
LED (red)
LED (green)
Non-retentive
No
500 VDC each
WAGO-SPEEDWAY 767
Manual
Version 1.1.0