Connecting Interface Cables; Table 25: Serial Interfaces: Pin Assignment - WAGO SPEEDWAY 767 Series Manual

48 Connecting Data and Supply Cables
Pos : 24.21 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Seri elle Sc hni ttstellen 767- 5203_4xM12 @ 11\mod_1328524197725_21.doc x @ 87726 @ 2 @ 1
5.5

Connecting Interface Cables

The interface cables are used to connect external devices with a serial interface.
When using cables that have not been pre-assembled, make sure that these cables
are equipped with M12 plugs rated to IP67. The following table outlines
connection assignments:

Table 25: Serial interfaces: Pin assignment

Connection
IN/OUT
X3
Pos : 24.22 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Pin assignment
Pin
IN/OUT
1
2
3
4
5
X4
Housing
767-5203 Serial Interface (RS-232, RS-422/-485)
RS-232
RTS
TxD
CTS
RxD
GND
Shield (screen)
WAGO-SPEEDWAY 767
RS-485/RS-422
TX+ / Y
TX– / Z
RX+ / A
RX– / B
GND
Shield (screen)
Manual
Version 1.1.0