Figure 17: Connectors Of Interfaces - WAGO SPEEDWAY 767 Series Manual

WAGO-SPEEDWAY 767
767-5203 Serial Interface (RS-232, RS-422/-485)
Pos : 24.23 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlus s_Seri elle Sc hni ttstellen 767- 5203, -5204 allgemein @ 12\mod_1329731789016_21.doc x @ 89190 @ @ 1
To connect the external devices to the serial interfaces (X3 or X4), process as
follows:
1. Disconnect the power supply from those devices on which you have
mounted the module.
2. Insert the plug of the connection cable to the socket of a serial interface (3)
of the module and tighten using the knurled-head screw.
3. Screw a protective cap on all unused connections to ensure that the IP67
degree of protection is adhered to.
Pos : 24.24 /Serie 767 ( WAGO-SPEED WAY)/Ansc hluss D aten- und Versorgungs kabel/I/O-M odule/Ansc hlüs se_4xM12_Sc hnittstellen ( oben) - Bil d @ 12\mod_1329735786188_21.doc x @ 89293 @ @ 1
3

Figure 17: Connectors of interfaces

Pos : 24.25 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.1.0
Connecting Data and Supply Cables
3
49