Table 44: Operational Messages 2 - WAGO SPEEDWAY 767 Series Manual

78 Diagnostics
Pos : 43.7 /Serie 767 (WAGO-SPEED WAY)/Di agnose/I/O-Modul e/Betriebs mel dungen 767- 5203 F, I/O (Pos. 16 + 17) @ 11\mod_1328606497924_21.doc x @ 87945 @ @ 1

Table 44: Operational messages 2

No. LED Color/status
16 F
Ch 1.1
Ch 2.1
17
Ch 1.2
Ch 2.2
Cause
Red There is at least one global
diagnostic message on the
module.
Off No data to send
Yellow flashing Channel sends data
Yellow static Channel is waiting for
readiness to receive from
the end device (XOn or
CTS).
Off No data receipt
Yellow flashing Channel receives data
Yellow static Channel reported XOff or
CTS reset.
Red Faulty data received or
buffer overflow.
767-5203 Serial Interface (RS-232, RS-422/-485)
Remedy/information
Check the supply voltages
U
767 Series components. For
more information, see the
section "Parameterizing">
"Diagnostic Overview"
Check the connection of the
external device and that the
transmission parameters
match.
-
Check the connection of the
external device and that the
transmission parameters
match.
Check the connection of the
external device and that the
transmission parameters
match.
-
Check the connection of the
external device and that the
transmission parameters
match.
Check the connection of the
external device and that the
transmission parameters
match.
WAGO-SPEEDWAY 767
and U of the upstream
LS A
Manual
Version 1.1.0