Register Assignment; Table 52: Register 32 - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-464 2/4 AI RTD configurable
7.1.1

Register Assignment

Table 52: Register 32

Register
32
Bit 0: User scaling
*)
0 The user scaling is switched off.
1 The user scaling is switched on.
Bit 1: Manufacturer scaling
0 The manufacturer scaling is switched off.
*)
1 The manufacturer scaling is switched on.
Bit 2: Watchdog timer (terminal box)
0 The Watchdog timer is not active.
*)
1 The Watchdog timer is active: The watchdog trips if no process data is
received within 100 ms.
Bit 3: Number notation
*)
0 Numeric values appear in two's complement.
1 Numeric values appear in amount / sign format.
Bit 4: S5-FB250 output format
*)
0 Numeric values appear in default format.
1 Numeric values appear in S5-FB250 format.
Bit 5: Manufacturer or user calibration
*)
0 The manufacturer calibration (R17, R18) is switched on.
1 The user calibration (R39, R40) is switched on.
Bit 6: Wire break / short circuit diagnostics
*)
0 Diagnostics is switched off.
1 Diagnostics is switched on.
Bit 7: Mean value filter
*)
0 The mean value filter is switched off.
1 The mean value filter is switched on.
Bit 8: Overflow limit
0 The overflow limit is switched off.
*)
1 The overflow limit is switched on: Numeric values are limited to values in
R50, R51.
Bit 9: Reserved
*)
0 This bit is reserved and may not be changed.
Bit 10: Number of measuring lines.
*)
0 2-wire
1 3-wire
Bit 11: Reserved
*)
0 This bit is reserved and may not be changed.
Function
Mode setting
Commissioning
Memory Access
EEPROM R/W
79
Default settings
0x0106
Manual
Version 1.1.0