WAGO -I/O-SYSTEM 750 Manual page 78
2/4 ai rtd configurable 2-/4-channel analog input module for rtds
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750:
- Manual (450 pages) ,
- User's installation and configuration (335 pages) ,
- Technical description, installation and configuration (236 pages)
Table of Contents
Advertisement
78
Commissioning
Set the parameters for channel 2 via control byte C1, status byte S1 and data
bytes D2 and D3. Use the same procedure as for channel 1.
Set the parameters for channel 3 via control byte C2, status byte S2 and data
bytes D4 and D5.
Set the parameters for channel 4 via control byte C3, status byte S3 and data
bytes D6 and D7.
Manual
Version 1.1.0
WAGO-I/O-SYSTEM 750
750-464 2/4 AI RTD configurable
Advertisement
Chapters
Table of Contents
