WAGO -I/O-SYSTEM 750 Manual page 100

100 Commissioning
Table 85: "Channel" Parameters
Selection box
Underrange
Range exceeded
Manual
Version 1.1.0
Possible settings
Important Note!
The setting has no impact on the process data
representation. The process value is always
saturated on the respective resistance limits of
the sensor type set.
(Principle: "Analog measuring instrument").
At these points, the user can define limits, which will
result in setting the corresponding bits in the status byte
(see section "Control / status byte") in the event of an
underrange or overrange. The selected decimal value
always refers to the final output process value.
As delivered, the limits for the underrange/overrange
are selected, so that they cannot be exceeded. The
function is thereby virtually deactivated.
At these points, the user can define limits, which will
result in setting the corresponding bits in the status byte
(see section "Control / status byte") in the event of an
underrange or overrange. The selected decimal value
always refers to the final output process value.
As delivered, the limits for the underrange/overrange
are selected, so that they cannot be exceeded. The
function is thereby virtually deactivated.
*)
Default setting
WAGO-I/O-SYSTEM 750
750-464 2/4 AI RTD configurable