OBO Bettermann isCon System Instructions page 9

System instructions OBO isCon
The isCon conductor is sold by the metre and in five variants:
®
Conductor type
isCon PR 90 SW (Premium)
isCon Pro 75 SW
isCon Pro+ 75 SW
isCon Pro+ 75 GR
isCon BA 45 SW (Basic)
Tab 1: Product variants, isCon
The grey isCon
conductor was tested according to VDE 0185-305-3 (IEC/EN 62305-3)
with a pulse voltage of min. 100 kV (1.2/50 μs) in rain and can be used
up to a length of max. 5 m for protection against touch voltages. If the
conductor is not used as protection against touch voltages, then colour-
ed painting, e.g. with facade paint, is also possible. As the external grey
jacket is non-conductive, it must be removed in the contact areas.
6
5
4
Fig 1: Schematic diagram of the isCon
Pro+ 75 GR
x = Ø 20 mm
(Pro 75 SW/BA 45 SW)
x = Ø 23 mm
(PR 90 SW)
Fig 2: Schematic diagram of the isCon
PR 90 SW
Legend:
1 Round conductor, multi-wire, 35 mm
2 Inner conductive layer
3 Insulation
4 Black, weakly conductive layer
lightning protection
®
Characteristic
Black
Black
Black
Grey
Black
conductor
®
conductor is also suitable for routing in the earth. The
®
35 mm²
Ø 23 mm
Ø 26 mm
conductors Pro+ 75 SW and
®
35 mm²
x
conductors Pro 75 SW, BA 45 SW and
®
Product description
Article no.
5408 018
5408 008
5408 002, 5408 004,
5408 006
5407 995, 5407 997
5408 014
, Cu
2
1
2
3
1
2
3
4
EN | 9