Table of Contents
Advertisement
System instructions OBO isCon
Air-termination rod with external isCon
•
Insert the air-termination rod into the air-termination rod stand from
above.
•
Tighten the clamp clip, thus fixing the air-termination rod.
Fig 52: Fixing the air-termination rod in the air-termination rod stand
•
In addition, fasten the isCon
stand using strip clips (cable ties), whilst maintaining the minimum
bend radius (see Tab. 2 on page 10) of the isCon
ground.
lightning protection
®
Assembling the air-termination rod
conductor
®
conductor to the air-termination rod
®
®
conductor to the
EN | 47
Advertisement
Table of Contents
