System instructions OBO isCon
•
Position the air-termination rod stand on the concrete bases.
Fig 48: Positioning the air-termination rod stand
•
Determine the inclination of the air-termination rod stand (depending
on the slope of the roof) using a spirit level.
•
Compensate for the inclination of the air-termination rod stand using
the hexagonal height compensation nuts (max. 5 degrees).
•
Tighten the lock nuts.
max. 5°
Fig 49: Compensating for the roof slope
lightning protection
®
Assembling the air-termination rod
EN | 45