About these instructions
6 | EN
The system is not designed for any other purpose than the one described
here. If the system is installed and used for another purpose, any liability,
warranty or damage claims shall be rendered null and void.
If you require information on the use of the OBO isCon
thing other than under the conditions of use described here, please speak
to your OBO contact.
1 5
Declaration of conformity
Lightning protection components are not subject to an EU directive. In-
stead, OBO makes the manufacturer's declarations of conformity avail-
able for the appropriate components of the lightning protection systems.
These declarations of conformity certify the agreement with the named
standards and stored documents, but do not, however, contain any guar-
antee of properties.
You can find individual proofs for lightning protection components on the
OBO web pages (www.obo-bettermann.com).
1 6
Basic standards
Comply with the following standards*, amongst others, during the plan-
ning, mounting, maintenance and repair of lightning protection systems:
•
DIN EN 62305-1 ED2 (IEC 62305-1, VDE 0185-305-1),
Protection against lightning Part 1: General principles
•
DIN EN 62305-2 ED2 (IEC 62305-2, VDE 0185-305-2),
Protection against lightning Part 2: Risk management
•
DIN EN 62305-3 ED 2(IEC 62305-3, VDE 0185-305-3),
Protection against lightning ‒ Part 3: Protection of structural facilities
and persons
•
DIN EN 62305-4 ED 2 (IEC 62305-4, VDE 0185-305-4),
Protection against lightning ‒ Part 4: Electrical and electronic systems
within structures
•
DIN EN 62561-1 ED 2 (IEC 62561-1, VDE 0185-561-1),
Lightning protection system components – Part 1: Requirements for
connection components
•
DIN EN 62561-2 ED2 (IEC 62561-2, VDE 0185-561-2),
Lightning protection system components – Part 2: Requirements for
conductors and earth electrodes
•
DIN EN 62561-4 ED2 (IEC 62561-4, VDE 0185-561-4),
Lightning protection system components – Part 4: Requirements for
conductor fasteners
•
DIN 18014, Foundation earthers
•
IEC TS 62561-8:1-2018, Lightning Protection System Compo-
nents (LPSC) – Part 8: Requirements for components for isolated
LPS
•
DIN 18531-1, Waterproofing of roofs, balconies and walkways – Part
1: Non-utilised and utilised roofs – Requirements and principles for
execution and design
•
IEC 60332-1-2, Tests on electric and optical fibre cables under fire
conditions – Part 1–2: Test for vertical flame propagation for a single
insulated wire or cable
* Status of standards: July 2018
system for some-
®
OBO Bettermann