Internal And External Iscon ® Conductor - OBO Bettermann isCon System Instructions

System instructions OBO isCon
7 3 Internal and external isCon
The mounting example shows the use of an isFang air-termination rod
with internal isCon
conductor
Note! I f you use the grey isCon
jacket before connecting the potential connection (see "5.1.1 Removing
the grey external jacket (isCon Pro+ 75 GR)" on page 28).
The potential connection clip
order to create an electrical connection between the black, weakly con-
ductive layer or protective jacket of the external isCon
air-termination rod. The potential is connected here. The internal potential
connection element then means that the internal isCon
connected with the potential connection. Alternatively, the potential can be
connected at the air-termination rod stand
connection clip
2
Fig 68: Internal and external isCon
lightning protection
®
conductor , to which a second, external isCon
®
1
is connected.
2
conductor, you must remove the grey external
®
(type 927 2 6-K) must be mounted, in
3
is mounted.
3
3
4
conductor
®
Mounting variants
conductor
®
conductor and the
®
conductor is also
®
, provided that the potential
4
1
®
EN | 61