Table of Contents
Advertisement
System instructions OBO isCon
Routing on non-conductive building structures
When routed along a non-conductive building structure (e.g. stone, con-
crete or wood):
•
Route electrically conductive connection rails (e.g. flat conductor, type
5052 V2A 30x3.5) in parallel to the isCon
with the functional equipotential bonding of the building.
•
Fasten the metallic isCon H VA conductor bracket for the isCon
ductor to it.
≤ 5 0 0
m m
Fig 64: isCon
bracket mounted on flat conductor
Routing along metallic pipes
•
Connect the potential connection element to metal pipes routed in
parallel (equipotential bonding conductors) and connected to the build-
ing's equipotential bonding at regular intervals.
≤ 5 0 0
m m
Fig 65: Running the isCon
sive area
lightning protection
®
Assembling the air-termination rod
conductor in potentially explosive area with isCon H VA conductor
®
conductor on an earthed pipe in a potentially explo-
®
conductor, which connect it
®
®
isCon H VA
isCon HS VA
EN | 57
con-
Advertisement
Table of Contents
