Table of Contents
Advertisement
Assembling the air-termination rod
WARNING
CAUTION
34 | EN
Preparing the isCon
conductor
®
•
When using the isCon Pro+ 75 GR conductor:
Using a cable knife, remove the grey external jacket to a length of
50 mm (see also "5.1 Cutting and stripping the isCon
page 28).
Risk of function loss!
If there is a lightning strike, connection faults can lead to devices being
destroyed, fires triggered and human lives being endangered.
After stripping, ensure an even cut edge.
Remove excesses by hand.
Risk of injury!
Sharp blades in the cutting head of the stripping tool isCon stripper 2.
Do not reach into the cutting head of the stripping tool isCon stripper 2!
•
Using a stripping stool, e.g. isCon stripper 2, reveal the copper core
along a length of 25 mm.
Fig 27: Cutting the insulation
•
Free the front area of the black, weakly conductive layer or protective
jacket from impurities and grease (e.g. OBO art. no. 5408 060).
isCon EPPA 004
Fig 28: Using a cleaning cloth
•
Remove the grub screws from the connection element.
conductor" on
®
OBO Bettermann
Advertisement
Table of Contents
