Lightning Protection Class I - OBO Bettermann isCon System Instructions

Mounting variants
Rd 8
3
62 | EN
7 4

Lightning protection class I

The mounting example shows a better division of the lightning current to
two isCon conductors through the use of an isFang air-termination rod
®
with two external conductors
on two separated ring conductors
sides of the building. Alternatively, the air-termination system can be im-
plemented with a single isCon
class 1.
The potential connection clip
order to create an electrical connection between the black, weakly con-
ductive layer or protective jacket of the external isCon® conductor and
the air-termination rod. The potential is connected here. Alternatively, the
potential can be connected at the air-termination rod stand
that the potential connection clip
The distance x (= separation distance s multiplied by two) between the
potential connection terminals and the rear connection elements should
be noted.
x
Fig 69: Current division to two isCon
class I
and . The isCon
1 2
and
3
Premium conductor in lightning protection
®
(type 927 2 6-K) must be mounted, in
5
is mounted.
5
1 2
5
Rd 8
conductors, e.g. for lightning protection
®
conductors are run
®
, which are run on opposite
4
, provided
6
4
x
6
OBO Bettermann