Assembling the air-termination rod
42 | EN
•
In addition, fasten the isCon
maximum distance of 1 metre through non-metallic strip clips (cable
ties, type 555 7.6x380 SWUV).
555 7.6x380 SWUV
Fig 43: Fastening the isCon
clips
•
Fasten the potential connection clip (type 927 2 6-K) to the metallic
element at the lower end of the insulated central rod.
Fig 44: Fastening the potential connection clip to the air-termination rod
Next steps:
– "6.3 Fastening the air-termination rod in the air-termination rod stand"
on page 43 or "6.4 Fastening the air-termination rod to pipes, a wall
or T support" on page 48
– "6.5 Routing the isCon
– "6.6 Attaching the potential connection" on page 50
conductor to the air-termination rod at a
®
conductor on the air-termination rod using strip
®
conductor" on page 49
®
OBO Bettermann