OBO Bettermann isCon System Instructions page 38

Assembling the air-termination rod
38 | EN
Fig 37: Fixing the air-termination rod in the central mast
• Tighten the screws at the connection point of the central rod and the
retaining rod (20 Nm).
Fig 38: Connecting the insulated central rod and the retaining rod
Next steps:
– "6.3 Fastening the air-termination rod in the air-termination rod stand"
on page 43 or "6.4 Fastening the air-termination rod to pipes, a wall
or T support" on page 48
– "6.5 Routing the isCon
– "6.6 Attaching the potential connection" on page 50
20 Nm
conductor" on page 49
®
20 Nm
OBO Bettermann