Testing Report For The Obo Iscon ® System - OBO Bettermann isCon System Instructions

Testing report for the OBO isCon® system
Tested building:
Last name
Contact
Street/no.
Postcode/town
Telephone
1. Were all the connection elements installed correctly according to the mounting instructions?
2. Is the entire routed OBO isCon
3. In the Basic, Pro and Premium types, is the black, weakly conductive layer of the conductor free of
damage/cracks?
4. Was the separation distance calculated for the location to be protected according to VDE 0185-
305-3 (IEC 62305-3)?
5. Is the equivalent separation distance maintained?
6. Is the protective jacket (type Pro+) continuous with a material thickness of at least 0.2 mm?
7. Is the separation distance maintained in the area between the connection element and the first
potential connection of the OBO isCon
8. Is the potential connection connected to the local equipotential bonding of the system to be protect-
ed using isCon PAE with a conductor of at least 6 mm
®
9. Is the minimum bend radius maintained?
10. With a stand-off installation, is the separation distance to the roof area maintained in the area up to
the first equipotential bonding clip?
11. Is the area up to the first equipotential bonding clip (distance of the calculated separation distance
to the conductor) free of metallic parts/conductor brackets, etc.?
12. Are test certificates according to IEC TS 62561-8 available?
13. Were only tested components of the OBO supply range used?
Only if all the questions were answered positively are the requirements of the manufacturer for installation fulfilled.
Tester
Place/date
66 | EN
9 Testing report for the OBO isCon
conductor in the protected area of the air-termination system?
®
conductor?
®
?
2
Signature
system
®
OBO Bettermann