3.2.3. Double-sided disc mowers with roller conditioner.
1
9
10
Fig. 3c. Parts of SaMASZ double-sided mower with roller conditioner (KDD W)
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage.
Drive from tractor rpm is transmitted through PTO (9) and intersecting axis gear (3) onto drive
shafts (6), which, through intersecting axis gears (7) power the cutterbars (4). The cutterbars have
discs with two knives each. Moreover drive from the tractor rpm, through intersecting axis gear (3),
PTO shafts (6), intersecting axis gears (7) and belt transmission (13A) or chain transmission (13B)
is transmitted onto swath rollers (14). Hydraulic lifting cylinders (2) fed from the tractor external
hydraulics are used for adjusting the mower to working position. Main frame (11), on which
cutterbars (4) are installed, is unloaded with springs (8). On main frame, safety guards (5) are
mounted. The mower is equipped with warning and signal plates (10) as standard.
3.2.4. Double-sided disk mowers with swath conditioner and conveyors
9
1
3
16
Fig. 3d. Parts of SaMASZ double-sided mower with swath conditioner and conveyors (KDD S/ST)
Operator's manual
6
8
3
4
6
9
17
4
7
2
7
13
19
8
15
18
10
14
- 8 -
Double-sided disc mowers
with central suspension
5
11
14
12
11
5