Double-Sided Disc Mowers With Swath Conditioner; Double-Sided Disc Mowers With Swath Rollers - SaMASZ KDD 861 Operator's Manual

OPERATOR'S MANUAL DOUBLE-SIDED MOWER KDD

3.2.2. Double-sided disc mowers with swath conditioner

5
9 1 3 6 8 2 11
10
4
7 12
Fig. 3b. Parts of SaMASZ double-sided mower with tine conditioner (KDD S/SL)
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage. Drive
from tractor's rpm is transmitted through PTO shaft (9) an intersecting axis gear I (3) onto drive shafts
(6), which, through intersecting axis gears II (7), power the cutterbars (4). On cutterbars, have discs
with two knives each. Moreover, drive from tractor's rpm is transmitted through intersecting axis gear I
(3), PTO shafts (6), intersecting axis gears II (7) directly transmitted onto swath conditioners (12).
Hydraulic lifting cylinders (2) fed from the tractor external hydraulics are used for adjusting the mower
to working position. Main frame (11), on which cutterbars (4) are installed, is unloaded with springs (8).
On main frame, safety guards (5) are mounted. The mower is equipped with warning and signal plates
(10) as standard.

3.2.3. Double-sided disc mowers with swath rollers

2
6 8
11 5
1
14
4 7
10 3 13
Fig. 3c. Parts of SaMASZ double-sided mower with roller conditioner (KDD W)
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage. Drive from
tractor rpm is transmitted through PTO (9) and intersecting axis gear I (3) onto drive shafts (6), which,
through intersecting axis gears II (7) power the cutterbars (4). The cutterbars have discs with two knives
each. Moreover drive from the tractor rpm, through intersecting axis gear I (3), PTO shafts (6),
intersecting axis gears II (7) and belt transmission (13) is transmitted onto swath rollers (14). Hydraulic
lifting cylinders (2) fed from the tractor external hydraulics are used for adjusting the mower to working
position. Main frame (11), on which cutterbars (4) are installed, is unloaded with springs (8). On main
frame, safety guards (5) are mounted. The mower is equipped with warning and signal plates (10) as
standard.
9