Qualifications Of Operator; Conditions Of Mounting Mower On Tractor; Transport - SaMASZ KDD 861 Operator's Manual

Before any maintenance works set the machine on a stable ground and secure it against

unintentional moving.
When cleaning the machine, for health protection use personal protective equipment.

Do not leave farming machinery on slopes or other descents without having provided sufficient

protection against its free runaway.
No person (except operator) should stand within danger area from any operating part, especially

when operating near roads and in areas with stones and other debris. Keep the safe distance.
In the event of any break in the equipment operation, turn the drive off. Shut down the tractor's

engine, take the ignition key off, leave the cabin and make sure there are no unauthorized
persons in the cabin and close the door.
In the event of an accident involving this mower in a field or on a road, follow all applicable

first aid procedures and contact SaMASZ technical service.
Mower should be kept clean, so as to avoid danger of fire.


4.2. Qualifications of operator

To provide safe machine operation each person being the machine operator must meet the
following requirements:
Operator should hold driving license, have ability to drive vehicles safely and know road traffic

rules.
Operator must be in proper physical condition to be able to operate the machine.

Operator must not be under the influence of alcohol, drugs and medicines, which all have

influence on vehicle driving and machine operation.
Operator should be familiarized with this manual and follow its provisions.

Operator should be familiar with working principles of both the tractor and the machine, and be

able to recognize and avoid hazards resulting from operation of the aggregate.

4.3. Conditions of mounting mower on tractor

Prior to the mounting operation, be sure that the tractor and mower hitches are compatible and

that the tractor's hitch load is adequate for the machine which is to be mounted or attached.
Prior to mounting the machine, examine the technical condition of the mower's hitch assembly

and tractor's 3-point linkage.
Use only genuine cotter pins to mount the mower on a tractor.


4.4. Transport

The lifting, handling and transporting operations can be very dangerous unless they are carried out
with the utmost caution. Have all persons not involved in the actual work move away from the area
and limit the zone where the operations are to be carried out. Also make sure that the area in which
the operations take place is clear and that there is a sufficient escape route, i.e. a free, safe zone to
which the operators can quickly move if the load should fall.
The safety hooks and ropes used to lift the machine must be of an adequate carrying capacity.
To minimize the risk of serious injury or death, do the following:
When the machine is converted from the transport position to the work position and vice versa,

you could be pinched or crushed by some of its parts. Take extra care when carrying out these
maneuvers and have all persons keep well clear of the danger zone.
Operator's manual
- 14 -
Double-sided disc mowers
with central suspension