Safety Labels And Their Meaning - SaMASZ KDD 861 Operator's Manual

When the risk of exposure to noise cannot be avoided or eliminated by any
protective means or organization of work, the employer (farmer) must:
1) provide the operator with individual means of noise protection if the noise
level in work place exceeds 80 dB.
2) provide the operator with individual means of noise protection and
supervise the correctness of its usage, if the noise level in work place reaches
or exceeds 85 dB.

4.10. Safety labels and their meaning

Safety labels are critical to safe use of this mower. They must be read, understood and followed.
Also, be sure that:
All warning decals are clean and legible

All lost or damaged decals are replaced by ordering new decals from your dealer or supplier

All persons using this mower have read the section of this manual explaining the meanings of

these labels
All spare part used for repair of the mower should have all safety labels provided by the

manufacturer.
N-01
Be extremely careful
when PTO shaft is
rotating
N-05
Warning: belt
transmission, be
extremely careful
N-11
Lubrication point
Operator's manual
N-02
Warning: cutting knives.
Approach during
operation is forbidden
N-06
Caution: pulling-in parts
N-14
- 20 -
Double-sided disc mowers
with central suspension
N-03
Read the operator's
manual before putting the
mower into operation
N-07
Operating is forbidden
when any person is within
the danger area of 170 ft
N-04
While making repairs the
machine must be stopped
N-09
Warning: rotor
N-15