Double-Sided Disk Mowers Without Swath Conditioner/Rollers And Conveyors - SaMASZ KDD 861 Operator's Manual

5.1.1.1.

Double-sided disk mowers without swath conditioner/rollers and conveyors

In all mower models with own hydraulic assembly, to connect the mower to the tractor use
three hydraulic hoses: red – A, green – B and yellow – C (see label N-108 Fig. 14a). Hose A with
red connector is used for lifting of cutting units on headlands, for transport and unloading and for
setting pressure in support assembly. Hoses with green B and yellow C are used for lifting of
conveyors – right and left.
Connect each hose to a separate section of the tractor's external hydraulics (Fig. 14b).
It would be best, if the section would have a free oil flow. The tractor should have three pairs of
hydraulic connectors.
Fig. 14a. Hydraulic hoses mower with conditioners/rollers – tractor
Make sure that the hydraulic hoses have been inserted properly and that
match. Make sure that there are no leaks in the hydraulic system and that the connections have been
correctly made.
WARNING!
Leaking fluid (hydraulic oil) at the high pressure can penetrate under the skin
and cause serious injury or death. If leaking fluid penetrates skin, immediately
seek medical assistance in order to prevent the risk of serious infection.
B
A
Operator's manual
A – red hose
Fig. 14b. Attaching hydraulic cords tractor – mower
B – green hose
- 27 -
Double-sided disc mowers
with central suspension
C – yellow hose
colours of the hoses
the
C