Double-Sided Disk Mowers With Hydro-Pneumatic Support; Standard Equipment And Spare Parts - SaMASZ KDD 861 Operator's Manual

3.2.6. Double-sided disk mowers with hydro-pneumatic support

All KDD disk mowers are also offered with hydro-pneumatic support (Fig. 4).
3
Fig. 4. Overview of rear disk mower with hydro-pneumatic support
Hydraulic lifting cylinder (3) and hydro-pneumatic suspension driven from the tractor external

hydraulics and hydraulic accumulators (1) are used to adjust the mower to working position.
3-point linkage frame, onto which cutterbar is set, features hydro-pneumatic support (2).

The abovementioned suspension enables the mower's impact to the ground to be controlled by
modification of the pressure in hydraulics.

3.3. Standard equipment and spare parts

The mowers are sold with the following standard equipment:
warranty card,

operator's manual with catalogue of spare parts

and declaration of conformity,
PTO shaft,

cutting disk with drum (2 pcs.),

spray paint (150 ml / 5.1 us fl oz),

reflective plates with lights,,

frame mounting key,

Moreover, mowers with conveyers (KDD S/SL T (H)) are provided with convey belt – 1 pc.
Operator's manual
cutting disk (2 pcs.),

disk module (2 sets),

slide (2 pcs.),

slide cap (2 pcs.),

knife base (46 pcs.),

skew knife L=105mm/ 4.1

knife holder (2 pcs.),

inter - skid insert (3pcs.).

- 10 -
Double-sided disc mowers
with central suspension
1 3
2
(180 pcs.),
''