Double-Sided Disc Mowers With Tine Conditioner - SaMASZ KDD 861 Operator's Manual

Double-sided disc mowers
Operator's manual
with central suspension
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage. Drive
from tractor's rpm is transmitted through PTO shaft (9) an intersecting axis gear I (3) onto drive
shafts (6), which, through intersecting axis gears II (7), power the cutterbars (4). On cutterbars,
have discs with two knives each. Hydraulic lifting cylinders (2) fed from the tractor external
hydraulics are used for adjusting the mower to working position. Main frame (11), on which
cutterbars unloaded with springs (8) are installed. On main frame, safety guard (5) and two swath
guides (12) are mounted. The mower is equipped with warning and signal plates (10) as standard.
On main frame, safety guards (5) are mounted.

3.2.2. Double-sided disc mowers with tine conditioner

1 8 2 11 5
9 6
10 3 4 7 12
Fig. 3b. Parts of SaMASZ double-sided mower with tine conditioner (KDD S/SL)
3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage.
Drive from tractor's rpm is transmitted through PTO shaft (9) an intersecting axis gear I (3) onto
drive shafts (6), which, through intersecting axis gears II (7), power the cutterbars (4). On
cutterbars, have discs with two knives each. Moreover, drive from tractor's rpm is transmitted
through intersecting axis gear I (3), PTO shafts (6), intersecting axis gears II (7) directly transmitted
onto swath conditioners (12). Hydraulic lifting cylinders (2) fed from the tractor external hydraulics
are used for adjusting the mower to working position. Main frame (11), on which cutterbars (4) are
installed, is unloaded with springs (8). On main frame, safety guards (5) are mounted. The mower
is equipped with warning and signal plates (10) as standard.
- 7 -