User Application Settings 'Direct' Via Keypad - Siemens Synova FC330A Manual

5.6

User application settings 'direct' via keypad

Also possible via PC-tool SWE330A (see page 66)
ü
Press «Start/stop» key and enter the password (0055 ok)
Display shows:
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
ü Select CONFIGURATION: 1. user functions
ü Enter > password?
SERVICE LEVEL: system configuration
> password?
hm: back to menu
CONFIGURATION:
(4.4.1)
ü Exit when user setting is completed by pressing key "start/stop"
Building Technologies
Fire Safety & Security Products
Note:
LCD-text shown is based on software program 'English international'
FUNCTIONS:
(4)
Stop: end operating
1. system data
2. collective line
3. password
4. addressable line
5. SWE330A
6. LON devices
7. serial ports
8. K6 inputs
1. function
2. system TEST
3. printout
4. configuration
CONFIGURATION:
(4.4)
1. ê
to define individual user functions
2. ê
to define the individual user texts
3. ê
to disconnect / connect addr. lines, control outputs, etc.
4. ê
to erase event memory / alarm counter / user data / element
(Code 8642 ok )
ê
to define basic functions and alarm organization
ê
to define the collective lines (only if K3M010 or K3M020 is equipped)
ê
to overwrite the 4 basic passwords
ê
to define the addressable lines / logical detector zones and conTrol zones
Ö
ê
for data transfer FC330A
ê
to define the remote indicating and control equipment
ê
to define the application on the serial ports
ê
to define programmable inputs on K3X0x0 / K6
1. user functions
2. user text
3. service functions
4. erase functions
PC (see page 70)
71
1583_o_en_−−_5
08.2005