Maintenance Settings (Accessible Via Pdm Only); Hart Version; Burst Mode - Siemens SITRANS L Series Operating Instructions Manual

B.4

Maintenance settings (accessible via PDM only)

Device lifetime
• Total device operating time
• Remaining device lifetime
• Maintenance required limit
• Maintenance demanded limit
• Maintenance alert activation
• Total expected device life
• Units
• Maintenance status
• Acknowledge status
• Acknowledge
Sensor lifetime
• Total sensor operating time
• Remaining sensor lifetime
• Maintenance required limit
• Maintenance demanded limit
• Maintenance alert activation
• Total expected sensor life
• Units
• Maintenance status
• Acknowledge status
• Acknowledge
B.5

HART version

SITRANS Probe LR conforms to HART rev. 5.
B.6

Burst mode

SITRANS Probe LR does not support burst mode.
SITRANS Probe LR with mA/HART
Operating Instructions, 05/2019, A5E32337711-AC
B.4 Maintenance settings (accessible via PDM only)
Service interval
• Time elapsed since last service
• Maintenance required limit
• Maintenance demanded limit
• Maintenance alert activation
• Total service interval
• Units
• Maintenance status
• Acknowledge status
• Acknowledge
Calibration interval
• Time elapsed since last calibration
• Maintenance required limit
• Maintenance demanded limit
• Maintenance alert activation
• Total calibration interval
• Units
• Maintenance status
• Acknowledge status
• Acknowledge
HART communication
93