Simatic Process Device Manager (Pdm); Maintenance Settings (Accessible Via Pdm Only) - Siemens Sitrans Probe LR Operating Instructions Manual

SIMATIC Process Device Manager (PDM)

This software package is designed to permit easy configuration, monitoring, and
troubleshooting of HART devices. The HART EDD for SITRANS Probe LR was written with
SIMATIC PDM in mind and has been extensively tested with this software.
The Device Description for SIMATIC PDM may be downloaded from the product page of
our website at: https://pia.khe.siemens.com/index.asp?Nr=11158, under Downloads.
All parameters accessible via the HART Communicator are also accessible via PDM. In
addition, the Maintenance parameters listed below are accessible via PDM only.

Maintenance settings (accessible via PDM only)

Device Lifetime
Total Device Operating Time
Remaining Device Lifetime
Maintenance Required Limit
Maintenance Demanded Limit
Maintenance Alert Activation
Total Expected Device Life
Units
Maintenance Status
Acknowledge Status
Acknowledge
Sensor Lifetime
Total Sensor Operating Time
Remaining Sensor Lifetime
Maintenance Required Limit
Maintenance Demanded Limit
Maintenance Alert Activation
Total Expected Sensor Life
Units
Maintenance Status
Acknowledge Status
Acknowledge
Service Interval
Time Elapsed Since Last Service
Maintenance Required Limit
Maintenance Demanded Limit
Maintenance Alert Activation
Total Service Interval
Units
Maintenance Status
Acknowledge Status
Acknowledge
7ML19985HR02 SITRANS Probe LR – INSTRUCTION MANUAL Page 79