User Application Settings; Basic Facilities - Siemens Synova FC330A Manual

5

User application settings

5.1

Basic facilities

The setting of the user functions of the fire detection system FC330A can be done direct on the panel (as explained under
'User application settings' page 71) or off−line via the PC-tool SWE330A. The SWE330A allows to save the user config-
uration on disk (backup).
DIRECT via keypad
direct editing via
keypad and internal
editor to program
user functions and
user text
S possible without any service device
Limitations:
– allocation of inputs/outputs on
LON-bus not possible
66
Building Technologies
Fire Safety & Security Products
OFF-LINE via configuration tool SWE330A
data up /
download
offline editing for
S programming
S user functions
S and user texts
S very convenient with extensive online help
S always with data backup on disk
Platform requirement:
−
WINDOWS−PC, Pentium or higher
−
minimum speed 120 MHz
− minimum 32MB RAM
− WIN95/WIN98/WIN98-SE/WIN-M/
WIN2000 and WIN-NT
− Explorer 5.0 and higher
− connecting cable, 9 core (1:1)
PC-Setup (COM1):
Baudrate
Databits
Parity
Stopbits
Protocol
Receive buffer
Transmit buffer
RS232-2
Windows-PC
9600 / 38400
8
none
1
hardware
high
low
1583_o_en_−−_5
08.2005