Set Up Wideband For Analog Headset; Wireless Headset Using Analog Headset Port - Cisco 8941 User Manual

Set Up Wideband for Analog Headset

Step 3 Select an accessory from the list and press Details.
The phone screen displays the details of the selected accessory. The information displayed on the phone screen
depends on the selected accessory. Most of the accessories provide these details:
• Device Name
• Device Type
• Configured
Step 4 Press Exit to return to a list of phone accessories.

Set Up Wideband for Analog Headset

Procedure
Step 1
Press Applications
Step 2 Use the Navigation pad and Select button to scroll and select Accessories.
A list of phone accessories displays.
Step 3 Select Analog Headset and press Setup.
The phone screen displays the wideband status for the analog headset.
Step 4
To enable wideband for the analog headset, press Turn On.
Step 5 To disable wideband for the analog headset, press Turn Off.
Step 6
Press Return

Wireless Headset Using Analog Headset Port

The Cisco Unified IP Phone 8941 and 8945 supports a wireless analog headset that uses a base station connected
to the analog headset port. The base station communicates with the wireless analog headset.
You enable or disable the headset and base station from the Applications menu.
The base station and headset allow you to remotely control basic phone functions, including off-hook, on-hook,
and ring indication.
You adjust the volume during a call using the volume button on the phone.
For more information on using the headset, see the headset manufacturer's documentation.
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager 10.0 (SCCP and
SIP)
82
.
to return to the Accessories screen.
Accessories