Sd Card Slot; Sd Card Slot With I/O Option Card - Kollmorgen AKD series Installation Manual

9.18 SD Card Slot

9.18.1 SD Card Slot with I/O option card

Drives with I/O option card offer a SD card slot to activate file transfers from/to the AKD and
SD Memory Card. These features can be started from the WorkBench software or with push-
button B1 (top of the drive) combined with rotary switch setting 10 or 11. Detailled description
can be found in the WorkBench Onlinehelp.
The save/load operations (AKD to SD or SD to AKD) are only possible while no program is
running and the drive is disabled.
BASIC programs and non volatile parameters can be saved/loaded.
If a fault occurs during save/load operations, the fault number is displayed in the display with
E followed by four digits. Error codes (➜ # 202) .
Supported SD card types
SD cards are preformatted by the manufacturer. The following table outlines the SD card
types and AKD support.
SD Type
SD (SDSC)
SDHC
SDXC
Features
If an SD card is plugged into the SD slot and the drive is disabled and no programm is run-
ning, set rotary switches as described below and press B1 for 5s to start the set function:
Function
Save data to SD card
Load data from SD card
File System
FAT16
FAT32
exFAT (Microsoft)
S1 S2 Remarks
1 1 Press B1 for 5s for save data from the drive to the SD
card.
1 0 Press B1 for 5s for loading data from the SD card to
the drive.
Kollmorgen | kdn.kollmorgen.com | October 2017
AKD Installation | 9 Electrical Installation
Capacity
1MB to 2GB
4GB to 32GB
>32GB to 2TB
Supported
YES
YES
NO
169