Kollmorgen
10.1.3
Expansion card -PROFIBUS-
This section describes the PROFIBUS expansion card for the S700.
Information on the range of functions and the software protocol can be found in our man-
ual "Communication Profile PROFIBUS DP".
The PROFIBUS expansion card has two 9-pin SubD sockets wired in parallel.
The supply voltage for the expansion card is provided by the servo amplifier.
10.1.3.1
Front view
10.1.3.2
Connection technology
Cable selection, cable routing, shielding, bus connector, bus termination and transmis-
sion times are all described in the "Installation Guidelines for PROFIBUS-DP/FMS" from
PNO, the PROFIBUS User Organization.
10.1.3.3
Connection diagram
S701...S724 (single channel STO) Instruction Manual
12/2010a
S700
Expansions
111