P - Pause Printer - CAB A Series Programming Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

p - pause Printer

The printer is set in the pause mode or removes it from pause - depending on the parameter.
Syntax:
p n CR
Example: p 1
Sets the printer into pause mode, if a print job runs, it will stop after the label is printed.
The Pause LED lights on the front panel.
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
n = 0 Pause off
n = 1 Pause on
[ESC] [i] [L] [S]
59
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
59