Table of Contents
Advertisement
PRODUCT MARKING AND BARCODE IDENTIFICATION
R - Replace Field Contents
The usage of the "R" command is to replace data contents of previously downloaded label.
Normally this is a label which is recalled from memory card into the printer´s internal memory.
The R command offers a easy way to print multiple labels with a minimum on data transmission.
The R command identifies the data by its field name and inserts a new value.
Syntax:
R name;data CR
Example:
m m
J
O R
S l1;0,0,68,71,100
T:REP; 12,25,0,3,6;Good Morning
A1
R REP;cab printers
A2
R REP; Hello together
A1
R REP; Last label
A1
This example transmits a label and replaces the single variable in this label with other data.
Additional information about using cut commands together with Replace fields can be found at
"C - Cutter Parameters".
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
R = Replace command.
name
=
The name of the text data field or barcode data field.
data
=
The new value of the field, which will replace the data of the
former label.
[ESC] [i] [L] [S]
161
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
161
Advertisement
Table of Contents
