PRODUCT MARKING AND BARCODE IDENTIFICATION
[MOD10:x]
Calculates the Modulo
Calculates and prints the Modulo 10 Checkdigitfor numerical barcodes
Syntax:
[MOD10:x]
This function can be used to visualize checkdigits of barcodes, which are sometimes invisible. Some
barcodes use a checkdigit for the scanner only which is not displayed in the human readable line.
Some applications require this checkdigit for internal usage. This can be done with the "Mod10"
function.
Example:
J
S l1;0,0,68,71,100
T:input;10,10,0,3,5;123456789
B 10,20,0,2OF5+MOD10,10,.3;[input]
T 10,40,0,3,5;[input][MOD10:input]
A 1
This example uses the input variable for a interleaved 2 of 5 barcode, which has to contain a modulo
10 digit. Usually only the input data is copied to a second field. As the printer cannot know, that the -
normally invisible checkdigit shall be shown on the label. Therefor [MOD10:input] is used.
[TABLE OF CONTENTS] [COMMAND LIST]
208
x
=
value which is used to calculate the checkdigit
[ESC] [i] [L] [S]
10
Checkdigit
cab Produkttechnik GmbH & Co KG
208
This
function is
available
for:
A-series
Apollo
no
Hermes
no
M-series
[INDEX]