PRODUCT MARKING AND BARCODE IDENTIFICATION
B - Barcode
Barcode type:
B[:name;]x,y,r,CODE128[+options], height,ne; [U:subcode]text CR
Syntax:
Height is the barcode height and ne is the narrow element.
[TABLE OF CONTENTS] [COMMAND LIST]
94
Code 128
Code 128
Length:
variable
Valid characters: all 128 ASCII characters
check digits:
yes (MOD 103)
ratio oriented:
no
Code 128 has a modulo 103 check digit which is the standard check digit of this
barcode. An additional check digit can be added with the +MOD option if required.
Code 128 consists of 3 code subsets. cab printers select automatically the best
subset of this barcode as described in the code 128 specification.The best subset
is the subset with the highest data compression as described in the original specs
of code128.
Subcode A
contains uppercase alphanumeric characters, special characters and control
characters. The printer can be forced to use subcode A with the option:
[U:CODEC] in the barcode text string.
Subcode B
contains all standard characters, upper case, lower case, special characters and
control characters. Subset B is the default value when data is transmitted.
The printer can be forced to use subcode B with the option:
[U:CODEB] in the barcode text string.
Subcode C
is used to encode exeptional numeric values with a good compression rate.
Encodes pairs of numbers.
The printer can be forced to use subcode C with the option: [U:CODEC] in the
barcode text string.
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
94
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]