Table of Contents
Advertisement
PRODUCT MARKING AND BARCODE IDENTIFICATION
q - query Printer
Syntax:
q l;name CR
Syntax:
q m CR
Syntax:
q p CR
Syntax:
q r CR
q s;name CR
Syntax:
Syntax:
q t CR
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
Query for label. Requests if the label ( LBL ) file called "name"is available.
Query for the memory card type Answer: Format „type, xxx kByte.CR", - The
response will be „No card.CR" if no memory card is attached to the printer
Query for peripheral equipment. Reports the type of peripheral devices that
are connected. Possible responses are:
NONE, CUTTER, REWINDER, DEMAND SENSOR, BLOW ON, TRIGGER
(Applicator) Possible answers depend on the printer type and it´s available
options !!
Used to verify if a label can be processed on the selected printer. Very helpful if
multiple printers with different peripheral equipments are connected.
Query for ribbon diameter.
If the ribbon roll has not been measured, the answer will be -1
(A-Series only , Firmware version V2.81 or higher.)
Can be used to get a early warning when the ribbon is close to be finished.
Query for scaleable fonts.
memory card.
This command is used to check if a specified font is available, to find out if it has
to be downloaded (again).
Query for time and date
Time and date format is identical to the "s" -command.
Used to find out if the printer´s date and time must be synchronized or to keep
track when a label was printed.
[ESC] [i] [L] [S]
Answer: diameter of the ribbon roll in millimeters.
Answer Y/N or C if the font had been found on the
Answer: yymmddhhmmss CR
61
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
61
Advertisement
Table of Contents
