Table of Contents
Advertisement
PRODUCT MARKING AND BARCODE IDENTIFICATION
ESC*
Activate all RS-485 printers
activates all printers in a RS-485 network
Syntax:
ESC*
Note: All printers have to be setup with the correct RS-485 network ID. This can be done with the
printer´s control panel (see operator´s manual).
This command can only be used in a RS-485 network ! Each network ID must be unique, otherwise
data crash will be the result. A maximum of 26 printers is allowed in a RS-485 network.
Valid RS-485 network adresses are A...Z
[TABLE OF CONTENTS] [COMMAND LIST]
30
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
30
This
function is
available
for:
A-series
Apollo
Hermes
M-series
no
[INDEX]
Advertisement
Table of Contents
